Specifications
- Power Requirements: 12-24 VDC @ 6w
- Listed Accessory: The weight transmitter is intended to be used with Listed Information Technology Equipment
- Enclosure Rating: IP-20 DIN Rail 35mm, mounted in customers enclosure with optional remote display mounting
- Operating Temperature: 14 to 104 ºF (-10 to +40 ºC)
- Display Capacity: Six digit, 7-segment, 0.5 inch high with separate annunciators, Over, Under and Accept backlight indicators
- Display Technology: Transflective LCD with RGB LED backlight
- Load Cell Excitation: 11.72 VDC
- Signal Input Range: 0.5 mV min. to 35 mV max.
- Load Cell Connection: 4 or 6 wire (remote excitation sensing)
- Minimum Cell Resistance: 43.75 ohms (8 – 350 ohm cells)
- Division Value Commercial: 1, 2, 5, 10, 20 or 50 x 10, 1, 0.1, 0.01, 0.001
- Division Value Non-Commercial: 0 to 99
- Sensitivity: 0.5 uV / scale division
- Resolution: 10,000 divisions
- Sample Rate: 1 to 200 samples per second, selectable
- Zero Range: +/-2% to 100% full scale, selectable
- Units of Measure: Pounds, Ounces, Kilograms, Grams
- Keys: Pounds, Ounces, Kilograms, Grams
- Serial Interface: Bi-directional software selectable RS232 (30ft/10m up to 19.2k baud) OR RS485 (3,300ft/1000m) 24 AWG shielded and twisted cable
- USB: 5-pin mini USB device
- Ethernet: 10/100 Ethernet (DHCP, TCP/IP, Embedded Web Page, Modbus TCP, Ethernet IP)
- Inputs: 4 Isolated inputs, 12-24 VDC current sink
- Outputs: 4 Isolated outputs, 12-24 VDC current sink
- Analog Input: Software selectable Non-isolated 0-10 VDC or 4-20mA DC
- Analog Output: (1) Non-isolated 0-10 VDC output (12 bit, 2k ohm min.) – (1) Non-isolated 4-20mA DC output (12 bit, 450 ohm max.)
- Approvals: Class III NTEP and Class III Measurement Canada
Features
- .5-in-high LCD Display
- ColorZONE Checkweighing
- DIN Rail Mounting Bracket
- NTEP Legal for Trade
- PLC Connectivity
- Powers up to 8 Load Cells
- Versatile Mounting Variations
- Web Interface Through IP Address
